PondBiotix10 uses a patented formulation of select biological species and catalyzing enzymes along with 23 essential vitamins and minerals and biostimulants to create a pond treatment system that is unmatched in performance. Works best in water temps from 65 degrees and above.

PB10 contains extremely high bacterial concentrations (10x) compared to most beneficial bacteria products in the pond treatment market. This makes PB10 a powerful pond-cleaning machine and one that can help reduce and eliminate many unwanted growths and conditions in your pond.

And if you have sludge and muck at the bottom, PB10 will help to greatly reduce this as well....and PB10 can be combined with our PondBiotixME (The Muck Eliminator) for even greater muck and sludge reduction.

PondBiotix10 Spring/Fall Formula (for spring and early fall use from 65 to 78 degrees)

PondBiotix10 Summer Formula (for summer use from 78 degrees and above)

*Free shipping is available in the continental U.S. only. Additional charges will be applied when shipping to Alaska and Hawaii.

Tips for the best results with this product:

• Dose appropriately for the gallon volume of the pond and the estimated nutrient load. The product has a high safety threshold so using 2x or 3x the pond volume is still safe for fish.
  

• All microbial products will work best with a good pond aerator in place.
  

• If the current water chemistry is unknown, a pH test is advised. This product will work best in a range from about 6.5 to 9.0
  

• For small ponds, ultraviolet sterilizers should be turned off for at least 24 to 48 hours after application.
  

• Do not use any microbial with copper-containing algaecides.
  

• Allow a reasonable time for the microbes to work. 30 days minimum and ideally up to 60 days (or two treatment cycles) for the best evaluation.
  
  If you have any additional questions on how to use this product, please reach out to us via the chat (lower right corner of this page) or by contacting us via email.
  

  ---

  
  

  Recommended Dosage Rates:

  * Use our pond calculator to calculate the acre-feet of your pond.

  Condition Of Pond	First Application	Follow Up Applications
  Not Bad	3 lbs per acre-foot	0.5 lbs per acre-foot
  Bad Enough	3 lbs per acre-foot	0.5 - 1.0 lbs per acre-foot
  Absolutely Horrible	3 lbs per acre-foot	0.5 - 1.0 lbs per acre-foot